Gas stove and electric range repair
The cooktop and the oven share a cabinet, and they fail in different ways. Gas burners, coil elements and radiant glass-top elements each have their own weak spots, so the first question is always what kind of surface you have.
Stove problems and likely causes
| Problem | Likely causes | Try first |
|---|---|---|
| Gas burner won't light | Clogged ports, wet igniter, cap out of place | Clean and dry the burner |
| Constant clicking | Wet igniter, spark module | Let the burner dry out |
| Coil burner stays cold | Element, receptacle, infinite switch | Swap coils to test |
| Glass-top zone won't heat | Radiant element, switch, limiter | Note which zone and setting |
| Weak or yellow flame | Dirty ports, gas supply | Clean the ports |
| Hot-surface light stays on | Sensor, switch | Check if the surface is actually hot |
Burner won't light? Common stove problems we fix
Gas burner won't light or keeps clicking
Food debris or moisture in the burner ports, a misaligned burner cap or a weak spark module or igniter cause most of these. Continuous clicking means the igniter is sparking but the flame isn't catching.
Electric coil burner stays cold
A burned-out coil element, a worn receptacle where the coil plugs in or a failed infinite switch can each cause it. A coil that works in another socket points to the socket.
Glass-top element doesn't heat or heats unevenly
A failed radiant element, a bad infinite switch or a tripped limiter can keep a zone cold. A zone that comes on but doesn't glow red is worth having tested before you assume the control board.
Knobs, display or indicator lights not working
A loose or burned wire, a failed switch or a control-board fault causes these. Surface-hot lights that stay on may be a sensor rather than an actual hot surface.
Quick stove checks before you call
- If you smell gas, don't use any burner, leave the home and call the gas utility.
- Turn the burners off and let them cool, then clean the ports with a soft brush and make sure each cap sits flat.
- Keep the cooktop dry; moisture in a gas burner will stop it from lighting.
- Don't use the oven or cooktop for heating the home.
What happens on a stove repair visit
We find out what you have first: gas, coil, glass-top or induction. Then we test the burner or element that's failing.
Igniters, switches, elements and receptacles are common fixes. A cracked glass top needs a new top, and we'll quote that on its own.
What we check
- Identify the fuel and cooktop type and test the affected burner or element directly.
- Clean and inspect gas burner ports, caps and igniters and check spark strength.
- Measure element resistance and check receptacles and terminal blocks for burn marks.
- Test infinite switches and, on glass-top ranges, the limiters and sensors.
- Confirm the supply circuit or gas supply for the whole range.
These are the repairs most often needed for this kind of appliance:
- Gas burner igniter or spark module replacement
- Coil element and receptacle replacement
- Infinite switch replacement
- Radiant glass-top element replacement
We confirm the exact repair after we diagnose it. If the part is on hand, we can usually finish in one visit.
Older or specialty parts sometimes have to be ordered. A diagnostic / service-call fee applies.
Stove and range types we repair
Gas, electric, glass-top or induction, we repair it.
- Gas ranges
- Electric coil ranges
- Glass and ceramic cooktops
- Induction cooktops
- Dual-fuel ranges
- Slide-in and freestanding
- Built-in cooktops and rangetops
Is your range worth repairing?
Ranges commonly last about 13 to 15 years. Igniters, switches, elements and receptacles are inexpensive repairs. A cracked glass top or several failed burners on an older range can make replacement more sensible.
Why spills and surges cause stove trouble
Gas cooking is common in Texas, and ignition faults are a frequent reason for stove service calls. Spills that bake onto burner ports are a frequent cause of clicking and poor flames. Power surges after thunderstorms sometimes take out the control board on electric and glass-top ranges.
Stove and range brands we repair
Every brand, including GE, Whirlpool, Frigidaire, Samsung, LG, KitchenAid, Maytag, Bosch, Viking and Wolf.
See all appliance brands we repair.
Stove & range repair across Abilene
We repair stoves and ranges all over Abilene, including Downtown, Elmwood, Chimney Rock, Abilene Heights, Westwood Richland and River Oaks / Brookhollow.
Not on the list? We still come to you. See all service areas.
Stove & range repair FAQs
Why does my gas stove click even after it lights?
A damp or dirty igniter can keep sparking after ignition. Cleaning and drying the burner assembly usually fixes it; if not, the spark module may need replacing.
Can I repair a cracked glass cooktop?
Not safely. A cracked glass top should be treated as a replacement item because the crack can spread and expose electrical parts.
How long does a stove repair take?
Most igniter, switch and element repairs take about an hour.
Why won't my gas burner light?
Usually blocked ports or a wet igniter. Let it dry, clean the ports and check that the cap sits flat.
Do you repair induction cooktops?
Yes, along with glass-top, coil and gas cooktops.
Can I use my stove if one burner is broken?
On an electric range, the other burners are usually fine. On a gas stove, don't use a burner that clicks but won't light, and leave if you smell gas.
Is there a diagnostic fee?
Yes, a diagnostic / service-call fee applies. Ask for the current fee when you schedule.
Need a stove & range looked at today? Call (325) 876-4452 for same-day or 24-hour emergency service in Abilene, or send a service request.